(Out of Stock) Test No Order - ANTON 180 Entertainment Unit (White Concrete on Solid Acacia Wood)

Our ANTON range covers dining and living rooms. The tops of all the Anton range are made from Reinforced Cement Fiberboard with a hardened finish. 

ANTON has sizeable, whitewashed, solid acacia wood legs and frames, with matt white tops. Its look and feel is 'Coastal'-cool and relaxed. Doors are held closed by magnetic catches, while drawers glide open and shut on metal runners. 

Features:

• Substantial, solid acacia wood legs and frames, matt white concrete table tops
• 'Coastal' look and feel
• Magnetic door catches, metal drawer runners

Measurement: cm

W180 D42 H55

Assembly:

Assembly required

Product Cleaning Care:

Product Details 

ANTON Tops are made from Reinforced Cement Fiberboard with a hardened finish.

The specially formulated finish makes for a hard-wearing cement finish, that is more scratch resistant than most cement products in the market today. The design features generous proportions and a unique effect on solid wood cabinet and legs

The Finishing on the top is 3 coats of Polyurethane based Pigment finishing. This finish is waterproof and stain resistant.

To Clean

To clean the cement top, use a light application of gentle surface cleaners/soaps and wipe with a soft cloth, and avoid bleach or abrasive pads/sponges. Abrasive materials may cause micro scratches that will further hold dirt and stains.

On the timber cabinets part, only use a damp cloth with water. Avoid soap/detergents like all timber furniture products. Avoid oils and stains, as they are not suitable for modern wire-brushed finishes. As a general tip, avoid microfiber cloth for wire-brushed products as they are more likely to snag onto the wood fibers. Paper towels and cotton cloth would work better.

General Care

Make sure to avoid direct sunlight on any timber, painted, or fabric products. Strong sunlight can cause colour to fade unevenly on the sections exposed.

 Also, avoid placing the furniture within 1-2 meters of a heater or fireplace. Timber products will expand and contract with temperature changes. If subjected to a strong source of heat, especially unevenly, it will be much more likely to crack/split. This applies to all timber products.